1379 days ago

DIY Fabric Headboard

Robert Anderson from Curtain Clean Rotorua

You’ll need:
• Upholstery weight (ideally) fabric (Spotlight or your favourite store)
• Batting - I used an extra thick batting, be sure to get the width you need to cover your plywood or card
• Plywood or cardboard (local hardware shop or repurpose something lying around)
• Staple gun (& staples!)
• Heavy duty mirror/picture hanger (we recommend Hangman Heavy Duty Mirror and Picture Hanger from Mitre 10 but you can use whatever suits you!)

Step 1. After laying the batting out on my tabletop, I put my sheet of plywood on top. The size of your plywood will depend on the size of your bed. Wrap the batting around the plywood and start stapling it down with a staple gun. Just staple your way all around the board. Super easy.

Step 2. Once the batting was secured, I laid out the fabric with the patterned side down. I gave it a quick ironing to get out any wrinkles before starting. After placing my plywood on top of the fabric, it was time to start stapling the fabric. I started off by doing the two long sides. I made sure to pull it tightly as I was going so that it wouldn’t be too loose in the front.

The corners are the part you want to be careful with. My technique (and I’m not sure if this is the “right” way or not, but it worked) is to approach it like I was wrapping a present. I get one side stapled, and then fold it in to the un-stapled side. Then I bring that piece up and pull it really tightly and staple along the seam. It takes a bit of practice, but I would just do it a few times until I got the perfect seam and then staple ‘er down.

Step 3. Now came the tricky part of actually hanging it. We wanted to attach it directly to the wall rather than to our bed. We searched around and finally came across a Heavy duty mirror / picture hanger (Mitre 10, Bunnings probably has similar) Simply mount one track on mirror or picture, then install the wall track with included anchorless fasteners.


We’re really happy with how it turned out. The colours are just right and it’s nice to bring another textile into the room. Plus, it makes our basic bed look about a million times nicer and more expensive!


Full tutorial with pictures: diyshowoff.com...

Image
More messages from your neighbours
3 days ago

Poll: Does the building consent process need to change?

The Team from Neighbourly.co.nz

We definitely need homes that are fit to live in but there are often frustrations when it comes to getting consent to modify your own home.
Do you think changes need made to the current process for building consent? Share your thoughts below.

Type 'Not For Print' if you wish your comments to be excluded from the Conversations column of your local paper.

Image
Does the building consent process need to change?
  • 91.7% Yes
    91.7% Complete
  • 8% No
    8% Complete
  • 0.3% Other - I'll share below!
    0.3% Complete
961 votes
14 hours ago

Say goodbye to tyre waste

Tyrewise

About 40% of the 6.5 million tyres Kiwis use every year are recycled, repurposed, or used as tyre-derived fuel. But the rest end up in landfills, stockpiled or dumped.

The good news is now there’s an easy solution to all that tyre waste. It’s called Tyrewise and is New Zealand’s first national tyre recycling scheme.

Tyrewise ensures that tyres in Aotearoa New Zealand are recycled or repurposed properly, saving millions from going to the landfill.

Find out more about the scheme online.
Find out more

Image