DIY Double Glazing with Insulation Film
Window insulation film works on the same principle as standard double glazing by creating a layer of still air in front of the glass that acts as insulation. DIY window insulation kits consist of clear plastic film for attaching to wooden window sashes or frames using double-sided adhesive tape. They cost a fraction of the price of double glazing yet offer good performance in reducing heat loss and condensation in your home, as well as preventing your sills and window dressings from going mouldy. You can pick up a kit from your local Mitre 10 or Bunnings.
Window insulation film is only designed to last one season, but it may remain intact for several years if your windows are in good condition and the film is undisturbed. Just be aware that adhesive tape used on the film may leave a stain if you leave it on for longer than one season.
Tips for installing
Installing DIY window insulation film is relatively easy – you only need a pair of scissors and a hair dryer.
• Make sure your window frames are dry and the paint is in good condition to avoid condensation forming inside the air gap.
• For wooden windows, applying a bead of sealant like silicone along the glass edge will further reduce the risk of moisture creeping into the air gap.
• Make sure your window pane is clean and streak free before putting the insulation up.
Step 1: Clean the Window
Clean the window thoroughly with an ammonia-based window cleaner and wipe it dry using a squeegee. Make sure that all of the window cleaner is wiped off, as it will dissolve the adhesive on the window film.
Step 2: Wet the glass with a light spray of water and baby shampoo
Fill a spray bottle with water and add a couple of drops of baby shampoo. Spray the mixture onto the window. This mixture helps the film stick to the window but still lets you slide the film around so you can fit it properly into the corners before the mixture dries.
Step 3: Measure and trim the film to size
Measure the window to see how large an area you need to cover, allowing at least two centimetres overlap for all four sides. Roll the window film out onto a flat horizontal surface and trim to size. Before you put the film on the window, start peeling the backing off the sticky side of the film. Use masking tape on both sides of one corner to get the peeling started.
Step 4: Put the window film onto the window
Once you’ve peeled off the top five to ten centimetres of backing, move the film up to the surface of the window. Start by putting the top two corners in place. Once the film is sitting in a good position you can slowly start to take the rest of the backing off.
Keep reading: www.curtainclean.co.nz...
Receive $100 Prezzy card — help us to test some online content
At my work, Write Limited, we’re testing some online content on behalf of a government department. We’re looking for a range of people to help us.
By taking part, you’d help to shine a light into important subjects that affect many New Zealanders. We can’t tell you what it’s about before you take part, as we don’t want to affect the results. But hopefully you’ll find it interesting!
We’re looking for people from any ethnic group, and any age from 18-65. Specifically, we’d love to talk to you if you’re interested in government projects that impact New Zealanders.
We’ll have a $100 Prezzy card for you as a small token of our thanks.
If you’re happy to be involved, email rebecca@write.co.nz to let us know why you’d participating, and your preferred day and time.
When: 13, 14, 15, 16, or 17 May between 9.00am and 4.00pm (or in the evening if that suits you better)
Test length: 1 hour
Where: Online (Zoom) or in-person at our offices on Lambton Quay. If you join us on Zoom, ideally you’re familiar with sharing screens.
Poll: Does the building consent process need to change?
We definitely need homes that are fit to live in but there are often frustrations when it comes to getting consent to modify your own home.
Do you think changes need made to the current process for building consent? Share your thoughts below.
Type 'Not For Print' if you wish your comments to be excluded from the Conversations column of your local paper.
-
91.4% Yes
-
8.3% No
-
0.3% Other - I'll share below!
Volunteers needed in Taita
Do you have trade skills? Or are you a person who is keen to help and learn? Work on the The Christ Church Taita Visitor Centre is well underway. This is a major historical taonga which was built over 160 years ago. It is a landmark in the history of European settlement in NZ and is the oldest church in Wellington.
Volunteers are now needed to assist in the fit out of the building’s interior. Are you keen to get involved in this exciting and significant project? ⬇️
Builders Labourer
This role is for anyone who would enjoy working on a building site interior and who is willing to learn new skills. Young people are especially welcome! Work may involve handling materials like Gib Board, plaster and insulation, some outdoor labour like digging trenches and laying paving. This work will be supervised by an experienced and qualified person.
Semi-skilled Tradesperson
This role is for anyone with previous building experience to assist in the fit out.
See our website for more info and to register your interest for these exciting roles:
tinyurl.com...
Loading…
