J
39 days ago

What's On: Garage Sale

Jill from Flagstaff

Massive bargains: kitchen ware, linen, hand bags, books, good quality clothing, bric a brac and more. All has to go. Closes at 11am. Fundraiser for Cantando Choir.
Garage Sale
  • Wesley Methodist Church Hall
More messages from your neighbours
4 minutes ago

Luxury Care Suites at Awatere

OceaniaHealthcare

When you need some extra care, you’ll feel right at home in our luxury Care Suites at Awatere.

Situated in the warm and inviting Beerescourt suburb in Hamilton, our Care Suites offer the ultimate combination of Rest Home and Hospital care with the creature comforts of home.

Our spacious, well-appointed rooms are perfect for entertaining family or friends with your very own living area, kitchenette, and ensuite. Plus, you can bring your own treasured possessions to truly make it yours.

Awatere is located at 1340 Victoria Street, Beerescourt, Hamilton.
Find out more

Image
4 hours ago

Testing and Tagging – just a money-making scheme?

Matt from Rukuhia

Testing and tagging is an Official Safety and Health requirement for businesses and organisations within New Zealand. It involves having electrical devices – no matter how small or insignificant – tested for standards compliance and basic faults. But how rigorous is this testing, and is it even having any positive effect regarding computers? Let's take a look.


Now, first of all, most devices which are less than two years old do not need to be tested and tagged. There are rigorous standards applied to most electronic devices before they can be sold within New Zealand, which makes usually testing of new items redundant (refurbished or ex-lease equipment might need a look though). Also, devices that are hard-wired into a facility do not need to be tested. The regime largely applies to devices which are portable or which have the possibility of being moved/unplugged. This of course include almost all computers.


But there is no regulatory body for testing and tagging, no qualifications necessary to do the job; not even basic electrical knowledge. Training involves buying a standardised electrical testing unit (PAT) and being trained on how to use it. Is this sufficient? I took a bunch of equipment I needed for a particular multimedia job to a tester in Hamilton. I knew all of it to be working fine, aside from the power adaptor for a laptop, which I knew was creating excessively noisy power, to the extent that if it were plugged into the same 4-plug adaptor as a TV, lines would appear on the screen.


Now, the only device out of 16 to be faulted was a long extension cord which I've used quite happily for several years for vacuum cleaning (and will continue using). But the tester couldn't really tell me what was wrong with it. In fact he couldn't tell my electronics-enthusiast friend, who was helping me shift the equipment, what the testing device even did. All he knew was whether or not the device faulted the equipment. Meanwhile, several power cords with serious dents in them went unnoticed; and of course my laptop adaptor came through with flying colours.


The PAT testing device itself is, for all intents and purposes, a dumbed-down multimeter. It's designed to be used by someone with minimal knowledge so that workplace appliances can get a screening from the most obvious faults, but it's no substitute for an electrician, or someone experienced with electronic equipment. Given that that's the case, is it even worth doing? Let's put this into perspective. How many accidents are caused per-year by appliances and electrical equipment?



According to the NZ Energy Safety Service’s electrical accident reports, over a 1-year period, 125 electrical accidents caused injury to 134 people, with only 20% of the accidents being due to a lack of maintenance, and half involving power lines, not appliances. Note: injury, not necessarily death. Clearly not many people have died as the result of untested electrical appliances, as the total number of workplace fatalities, by any cause, from 2011 through to 2017 was 317 people, according to Worksafe NZ. Meanwhile, accidents involving trampolines exceeded 1000 per month in New Zealand according to the 2018 ACC report.


Someone involved in the testing and tagging industry will of course tell you, well, think how much worse it would be if we didn't have testing and tagging. That may well be the case for many electrical appliances. But as someone who's been working with computers for 25 years, I have never seen one explode or catch fire, nor have I heard of anyone being injured while fixing them or using them (occasionally a minimal shock might occur, but being cut by sharp metal edges is much more common). In my view, the testing involved is wasteful, insufficient and clearly doesn't detect basic power regulatory problems.

So, get your items tested and tagged if you must. Clearly some appliances carry heavier power loads and are therefore more dangerous than others, so in those cases testing and tagging may in fact screen out basic faults. But for computers at least, testing and tagging is a gimmick; an unregulated and unneeded waste of time and effort. Also, it costs a lot. Reach out to a local politician if this concerns you.

- Matt Bentley is the computer repair expert running Bentley Home PC Support
Email info@homepcsupport.co.nz or phone 0211348576.
www.homepcsupport.co.nz...

Image
9 hours ago

More access for pumping mums?

The team Reporter from Hamilton Press

Waikato mum of two, Sheena Thompson, is calling out shopping centres for not having accessible power sockets or private rooms for pumping mums in parenting facilities.

It's not uncommon for mums to pump breast milk in hot cars, cleaning cupboards, shower stalls or in disabled toilets due to a lack of lactation rooms. Are you a mum who's struggled with this?

Image